Radio Shack Easy Remote Especificaciones Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
1. Press the device key for the device you want to operate, then point
the 6-in-1 at the device and press PWR (or CH + for some cable
converters) to turn the device on.
2. Repeat Step 1 for all other devices you want to operate.
3. Point the 6-in-1 Remote Control toward the device you want to control,
then press the appropriate device key and the desired command keys.
Note:
The command keys on the 6-in-1 Remote Control work the same as the keys
on the original remote control; however, the labeling might differ
slightly.
4. To turn off the last device you selected, press PWER. To turn off
other devices, press the device key for the device you wish to turn off
and then press PWR.
CONTROLLING LIGHTS AND APPLIANCES:
The Plug 'n Power feature allows you to control lamps and appliances with
your 6-in-1 Remote Control and an IR Command Console. You will need Plug
'n Power light modules and appliance modules plus an IR Command Console
(all available through your local Radio Shack store) to use this feature.
Follow these steps to control Plug 'n Power modules with the 6-in-1
Remote Control and an IR Command Console.
1. Set the house code dial on top of your IR Command Console to the same
letter as your Plug'n Power modules.
2. Set the bank switch on your IR Command Console for the group of
modules you want to control (1-4 or 5-8).
3. Press Plug 'n Power on the 6-in-1 Remote Control.
4. To turn on all light and appliance modules set to the same code as
your Command Console, press All Lts On (PWR) on the 6-in-1 Remote
Control, or ALL LIGHTS ON on the Command Console.
To turn off all light and appliance modules set to the same house code as
your Command Console, press All Off (MUTE) on the 6-in-1 Remote Control,
or ALL UNITS OFF on the Command Console.
5. To turn on or off specific lights and appliances using the 6-in-1
Remote Control, press the digit key (1, 2, 3, 4, 5, 6, 7, or 8) for the
module you want to control. Then press ON or OFF (CH + or CH-).
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 45 46

Comentarios a estos manuales

Sin comentarios