Radio Shack Easy Remote Especificaciones descargar pdf (Pagina 10)

3. Press and hold SET UP until the red indicator light blinks twice. This

means that your sequence is erased.

PUNCH-THROUGH:

Using Punch-Through:

The punch-through feature lets you alternately control two different

devices without pressing the device selection keys for each one. Here's

how it works.

Not all of the 6-in-1 Remote Control's keys are used by every device. For

example, a TV is often the only device that uses the volume keys.

After you press TV, then press VCR, the functions not used by the VCR

retain their TV functions.

Note:

The punch-through feature does not work if the last two devices you

selected have the same (or similar) features. For example, most Tvs and

some cable converters have PWR keys on their remote controls. In this

case, you must press the desired device key before you use the remote

control's PWR keys.

Turning Punch-Through On and Off:

If your cable converter or VCR has volume control, you can turn off the

punch-through feature to allow the 6-in-1 to control the volume of those

devices. This allows your cable converter or VCR to control the volume

of your TV set (if it can already so). Once you turn off punch-through,

you must press the device key for the device (cable converter or VCR) you

want to use to control the volume.

Follow these steps to turn off the punch-through feature.

1. Press the device key (CBL or VCR) for the device you want to use to

control the volume. Then press SET UP until the red indicator light

blinks twice.

2. Press 9 - 9 - 3. The red indicator light blinks twice. Press the

device key (CBL or VCR) for the device you want to use to control the

volume. The red indicator light blinks twice to indicate punch-through

is turned off.

To turn on the punch-through feature, press SET UP - 9 - 9 - 3 - TV.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Sin comentarios

Radio Shack Easy Remote Especificaciones Pagina 10