Radio Shack 8-IN-ONE REMOTE Especificaciones descargar pdf (Pagina 26)

NOTE:Ifan [INVALID] message appears, you have inadvertently pressed an incorrect

key. Simply note your error and continue programming.

2. Press ▲ five times until [KEYMOVER] appears.

NOTE:Ifyou go past [KEYMOVER],press ▼ one or more times to return to it.

3. Press SELECT once to begin programming. [FROM MODE] appears.

4. Select a source mode (e.g.,

TV) and press it once.[FROM KEY] appears.

5. Select a source key (e.g.,

VOL+) and press it once.[TO MODE] appears.

6. Select a destination mode (e.g.,

VCR) and press it once.[TO KEY] appears.

7. Select a destination key (e.g.,

VOL+) and press it once.[SUCCESS] appears,

followed by

[EXIT SETUP].The remote will automatically exit the programming

mode and return to normal operation.

8. Repeat steps 1 through 7 twice more,substituting

VOL– and MUTE as source

and destination keys in steps 5 and 7.

Upon completion of the above procedure, you can now use your remote to control the TV’s

volume and mute in the

VCR mode, as well as in the TV mode.

RESTORING A SINGLE KEYMOVED KEY

1. Perform steps 1 through 7 of the previous section, Programming Keymover,on

the previous page.However, this time in step 6,make the destination mode the

same as the source mode (e.g.,

TV). [CLR KMVR] appears.

2. Press

SELECT once to clear the keymoved key. [DELETED] appears, followed by

[EXIT SETUP].The remote will automatically exit the

programming mode and return to normal operation.

continued on next page...

Using Keymover 27

USER’S GUIDE

(x 5)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 89 90

Sin comentarios

Radio Shack 8-IN-ONE REMOTE Especificaciones Pagina 26