Radio Shack 8-IN-ONE REMOTE Especificaciones descargar pdf (Pagina 19)

20 Searching For Your Code/Using Learning

8-IN-ONE REMOTE

SEARCHING FOR YOUR CODE (continued)

8. Once you have found a working code,press SELECT once to save it. The display

confirms your entry with

[SUCCESS] and then [EXIT SETUP].

The remote returns to normal operation.

NOTE: For future reference, write down the working device code in the appropriate boxes

on page 17.

9. To perform a manual code search for another device,repeat steps 1 through 8,

but this time (in step 5) substitute the appropriate device key for the device

you are searching for.

USING LEARNING

The remote includes a Learning feature so you can add functions that are unique to your

home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some

considerations:

• Your original remote controls must be in working order for the learning feature to

work properly.

• Learned keys are mode specific, so each one can store a unique function for each mode.

• Learned keys can be used in macros (see

Using Macros on page 24).

• You can also use any key for learning, except device keys,

P,,and POWER.However,

using them as learned keys will overwrite their original functions.

• For optimum learning, avoid high levels of ambient light such as natural sunlight or

energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning. Be sure to

press each key within 5 seconds of the previous entry. If not, the remote will exit

the programming mode.

PROGRAMMING A LEARNING KEY

1. On the remote, press and hold P until the display changes from the default

device and time to

[CODE SET].

NOTE: Default values for device, its code, and time are shown above.Your remote control

settings may be different.

NOTE: If you wish to exit the programming mode at any time, press EXIT once. An

[EXIT] message appears as the remote control returns to normal operation.

NOTE:Ifan [INVALID] message appears, you have inadvertently pressed an incorrect

key. Simply note your error and continue programming.

2. Press ▼ twice until [IR LEARN] appears.

NOTE:Ifyou go past [IR LEARN],press ▲ one or more times to return to it.

(x 2)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

Sin comentarios

Radio Shack 8-IN-ONE REMOTE Especificaciones Pagina 19