Radio Shack Micro Guía de usuario descargar pdf (Pagina 8)

2. Settheweightingandresponse(see“Setting the

Weighting”and“Setting the Response Time”onPage5).

3. Pointthemeter’smicrophoneatthesoundsource.The

meterdisplaysthecontinuousaveragesoundlevel

duringaone-secondsamplingperiodandupdatesthe

numberonthedisplayonceasecond.

4. Afterthemeasurement,setRANGEtoOFF.

Taking Maximum Measurements

1.

FollowSteps1-3in“Continuous Average Measurements”.

2. PressMAX;thewordMAX appears.

Themeterdisplaysonlytheloudestmeasuredsound

levelduringtheone-secondsamplingperiod.The

bargraphshowsthemaximumlevelevery0.2or0.5

seconds.

Thebargraphsegmentthatcorrespondstothepeak

readingstaysonthedisplayfor2secondsoruntilthe

metermeasuresahighermaximumlevel.

3. PressMAXagaintocancelthecontinuousmaximum

measurement.Acontinuousaveragemeasurement

resumes.

Integrated Average Measurements

Followthesestepstomonitorthesoundlevelandaverage

themeasurementoveraperiodof1to199seconds.The

meterstorestheaverage,maximum,andminimumsound

levelsduringthesettime.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Radio Shack Micro Guía de usuario Pagina 8