Radio Shack Desktop Radio Scanner Guía de usuario descargar pdf (Pagina 11)

20 21

Scanner Cloning

If you have access to a compatible

scanner that is already programmed for

your area, you can transfer that scanner's

programming using a standard stereo

patch cord (not included), terminated with

1/8” male stereo plugs at each end.

The PRO-652 is compatible with the

following scanner models: PRO-106,

PRO-197, PRO-651, PRO-652, GRE PSR-500, PSR-

600, Whistler WS1040, and WS1065.

To clone a scanner:

1. Connect the two scanners at their PC/IF ports.

2. Turn on both scanners.

3. On the source scanner, press PROG.

4. Press the GLOB softkey.

5. Use the 4-direction keypad to locate the Clone

Send option.

6. Press SEL to transfer data.

NOTE: Working memory and global settings are

transferred but not V-Scanner folders. The target

scanner's working memory will be overwritten.

In some cases, the CCDump output may interfere

with cloning.

To turn off CCDump:

1. Press PROG.

2. Press FUNC and then the GLOB softkey.

3. Use the 4-direction keypad to locate the

CCDump option and change the setting.

4. Press the Save softkey.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Comentarios a estos manuales

Sin comentarios