3
3. Press a button (
1
,
2
,
3
,
4
,
5
, or
6
) on the selector’s front panel to
learn the desired component’s signal. The selected button’s indi-
cator lights.
4. Point the component’s remote control at the selector, then press
the remote’s power key to turn on the component.
If you are using a universal remote, press the remote’s key for the
desired component, then press the remote’s power key.
When the selector has learned the component’s signal, the input’s
button’s indicator turns off.
5. Repeat Steps 3–4 for up to five additional components.
6. Press
LEARN
again. The LEARN indicator turns off.
OPERATION
Manually Operating the Selector
1. Turn on the component you want to use.
2. Press
POWER
to turn on the selector.
3. To view material from the component connected to
INPUT 1
, press
1
. Likewise, for
INPUT 2
, press
2
, for
INPUT 3
, press
3
, and so on.
4. Operate the TV and components as you usually do.
Tip:
Place a small white adhesive label below the buttons on the front
of the selector to note which components are connected to which set
of jacks (
INPUT 1
,
INPUT 2
,
INPUT 3
, and so on).
Using the Remote Controls to Operate the Selector
1. Press
POWER
to turn on the selector.
2. To view material from the component connected to
INPUT 1
, point
that component’s remote control at the selector and press the
power key on the remote control to turn on the component.
Note:
If you are using a universal remote, press the remote con-
trol’s key for the desired component, then press the remote’s
power key.
3. Repeat Step 2 to turn on other components connected to
INPUT
2
,
INPUT 3
, and so on.
Notes:
• You can only use one input component at a time.
• If the desired component is already turned on, using the remote
to switch to it might turn it off. If this happens, press the
remote’s power key again to turn it back on.
4. Operate the component as usual.
TROUBLESHOOTING
We do not expect you to have any problems with your selector, but if
you do, these suggestions might help.
Problem Suggestion
The selector does not work or
works poorly.
Be sure the AC adapter is properly and
securely connected.
Be sure the power is turned on. If the power
is turned on but the selector still does not
work, take it to your local RadioShack store
for assistance.
While learning commands from
the standard or universal
remote control, the selector
does not respond or its indica-
tor lights.
Be sure the learning process is correct.
Try the remote control’s other keys.
Try another remote control.
(12 paginas)
(68 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales