Radio Shack 6-in-1 Remote Control Instrucciones de operaciones descargar pdf (Pagina 7)

. Press and hold the SET UP button until the red indicator turns on,

then release the button.

. Press and release the desired mode button (TV, VCR, etc.),

the red indicator blinks then stays on.

3. Press and release the LEARN button, the red indicator blinks

hen stays on.

4. Press and release the Learning Remote button that you want to

each (e.g. POWER).

5. Point both remotes facing each other by approximately 3 cm apart

6. Press and hold the Original Remote button (e.g. Power) until the

red indicator blinks once and stays on. If there is a learning

problem, the indicator blinks for three seconds and stays on.

If this happens, repeat Steps 4 to 6.

7. Repeat Steps 4-6 for other buttons you want to learn.

8. Press and release the SET UP button when all desired remote

commands are learned. Code Learning is now complete.

Clearing Commands

To Clear all Learned Commands under a Mode

Clearing learned commands is helpful if, for example, you replace your CD

player with another brand or model. If you had learned a feature from

your old CD player’s original remote on to this remote (such as RANDOM

PLAY), that feature would no longer work for your new CD player.

Should you wish to remove or clear one or more “learned” commands,

follow the steps below:

1. Press and hold the SET UP button until the red indicator turns on.

Release the SET UP button.

2. Press and release the button for the mode you want to clear (TV,

VCR, etc.). The red indicator blinks off.

3. Press and release the LEARN button TWICE. The red indicator

blinks off.

4. Press and release the SET UP button. The red indicator turns off.

All learned Commands under that mode are now cleared.

Master Clear -

To Clear all Learned Commands under all Modes

1. Press and hold the SET UP button until the red indicator turns on.

Release the SET UP button.

2. Press and release the LEARN button TWICE. The red indicator

blinks off.

3. Press and release the SET UP button. The red indicator turns off.

All Learned commands in the remote are now cleared.

Troubleshooting

Remote does not operate your product.

• Press the mode button of the product you want to control.

•

am the remote with a new code.

•

Ins

all new batteries. (You might have to re-program your remote

er ins

alling ne

w batt

ies.)

•

emo

e ma

y no

t be compatible with your product.

emo

te does not operate some features of your product.

•

ogram remote with a new code.

•

emote may not be able to operate all features of your

oduct or butt

on names might be different than your product.

Red Indicator blinks after you program a product code.

• Remote did not accept the code.

• Try to program the code again or try a different code

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Radio Shack 6-in-1 Remote Control Instrucciones de operaciones Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Radio Shack 6-in-1 Remote Control