Radio Shack 2-Station Wireless FM Intercom El manual del propietario descargar pdf (Pagina 3)

3

Note:

You can monitor only one station at a

time.

Press

LOCK

on the station in the area you

want to monitor. The indicator lights to let you

know the station is transmitting.

When you finish monitoring, press

TALK

or

CALL

on the station in the area you are moni-

toring to release the lock. The indicator turns

off.

Note:

When you press

LOCK

on a station, you

cannot call or talk to that station until you re-

lease the lock by pressing

TALK

or

CALL

on

that station. (Or you can turn off that station to

release the lock.)

Using Additional Stations

You can add additional stations to your inter-

com system as long as they transmit on the

same frequency. The stations and their boxes

are labeled by frequency indicators — A (200

kHz), B (270 kHz), or C (230 kHz). Stations in

the same box have the same frequency.

Be sure the letter on the stations you plan to

add matches the letter on your current sta-

tions. If you want to set up a separate inter-

com system, however, be sure it operates on

a different frequency.

CARE

Keep the intercom system dry; if it gets wet,

wipe it dry immediately. Use and store the in-

tercom system only in normal temperature en-

vironments. Handle the intercom system

carefully; do not drop it. Keep the intercom

system away from dust and dirt, and wipe it

with a damp cloth occasionally to keep it look-

ing new.

Modifying or tampering with the intercom sys-

tem’s internal components can cause a mal-

function and might invalidate its warranty and

void your FCC authorization to operate it. If

your intercom system is not performing as it

should, take it to your local RadioShack store

for assistance.

THE FCC WANTS YOU

TO KNOW

Your intercom system might cause TV or ra-

dio interference even when it is operating

properly. To determine whether your stations

are causing the interference, turn them off. If

the interference goes away, your stations are

causing it. Try to eliminate the interference by:

• Moving both stations away from the

receiver

• Connecting the stations to outlets that are

on a different electrical circuit from the

receiver

This equipment has been tested and found to

comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the

FCC Rules

.

These limits are designed to provide reason-

able protection against harmful interference in

a residential installation. This equipment gen-

erates, uses and can radiate radio frequency

energy and, if not installed and used in accor-

dance with the instructions, may cause harm-

ful interference to radio communications.

However, there is no guarantee that interfer-

ence will not occur in a particular installation.

If this equipment does cause harmful interfer-

ence to radio or television reception, which

can be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

1 2 3 4

Comentarios a estos manuales

Sin comentarios