Radio Shack SYSTEM 2000 Manual de usuario Pagina 1

Cat. No. 43-972OWNER’S MANUALPlease read before using this equipment.System 2000100 Number Memory2-Line Caller IDWith 100 Caller ID Memo-ries43-972.f

10Care and Maintenance... 33Lightning...

11PREPARATIONCONNECTING THE SUPPLIED AC ADAPTERThe supplied AC adapter provides power for the module. Please notethat although the module displays a t

12Follow these steps to connect the AC adapter.1. Plug the AC adapter’s barrel plug into the module’s 9VDC jack.2. Plug the AC adapter into a standard

13Notes: • If AC power fails or if the AC adapter is disconnected, the moduleautomatically tests the battery each time it receives a new call.When a

142. Use a coin or other flat object to turn the screw on the bottom of themodule to OPEN, then slide off the battery compartment cover.3. Remove and

15Caution: Always remove an old or weak battery. Batteries can leakchemicals that can damage electronic circuits.4. Before the display dims, slide the

16SETTING THE DISPLAY LANGUAGEWhen you connect power to the modulethe first time, the module begins itsstart-up sequence. The message re-ceived indica

17ADJUSTING THE DISPLAY CONTRASTFollow these steps to adjust the display’s contrast for the best visibility.1. Press and hold down DELETE.2. While hol

18CONNECTING TO THE PHONES/PHONE LINESThe module connects to your phone(s) and the phone line(s) using fourmodular phone line connectors. You can conn

19Connecting to a Two-Line Phone and a Two-Line Phone Line JackConnecting to a Two-Line Phone and Two One-Line Jacks9VDC9VDC43-972.fm Page 19 Monday

2© 1996 Tandy Corporation.All Rights Reserved.RadioShack is a trademark used by Tandy Corporation.Warning: To prevent fire or shock hazard, do not exp

20Connecting to a One-Line Phone and a Two-Line Phone Line JackConnecting to Two One-Line Phones and a Two-Line Phone Line Jack9VDC9VDC43-972.fm Page

21Connecting to Two One-Line Phones and Two One-Line JacksCONNECTING TO AN ANSWERING MACHINEYou can connect an answering machine to your module, phone

22Connecting for Both Lines or Line 1 OnlyConnecting for Line 2 Only 9VDC9VDC43-972.fm Page 22 Monday, August 16, 1999 4:19 PM

23MOUNTING THE MODULEYou can place the module directly on a desk, shelf, or table. Or, you canmount the module on a wall. To mount the module on the w

243. Route the phone line cords and ACadapter cord through the upperand lower slots on the mountingbracket.4. Align the slots on the back of themodule

25OPERATION RECEIVING AND STORING CALLSWhen you receive a call, the Caller ID information sent by the phonecompany, including the caller’s telephone n

26The module displays the current date and time (as sent by the tele-phone company with call information).REVIEWING CALLS• To select the line you want

27Notes: • If there are no calls stored in the module, -NO CALLS- appearson the display when you press a REVIEW button.•-END OF LIST- appears on the d

28DISPLAYED CALL INFORMATIONThe module might display any of the following information.Indicator InformationUNAVAILABLEAppears instead of the phone num

29Indicator InformationLINE ERRORAppears if there is an error in the Caller ID transmission.Note: Minor electrical disturbances can af-fect the caller

3FEATURESYour RadioShack Caller ID System 2000 is the latest in telephone Caller IDtechnology. If Caller ID service is available in your area and you

30Indicator InformationNEW L1=(number of new calls) L2=(num-ber of new calls)Appears if the module received one or more calls on a line since the last

31DELETING CALLSWhen the module’s memory is full, it automatically deletes the oldestcall information when a new call arrives. You can also manually d

32Deleting All CallsFollow these steps to delete all calls on one line.1. Repeatedly press LINE SELECT until LINE 1 or LINE 2 appearson the display.2.

33CARE AND MAINTENANCE Your RadioShack Caller ID System 2000 is an example of superior de-sign and craftsmanship. The following suggestions will help

34Modifying or tampering with your module’s internal components cancause a malfunction and might invalidate the module’s warranty. If yourmodule is no

35NOTES43-972.fm Page 35 Monday, August 16, 1999 4:19 PM

RadioShackA Division of Tandy CorporationFort Worth, Texas 761027A6 Printed in ThailandRadioShack Limited WarrantyThis telephone product is warranted

4Large Display — makes it easy to see caller information, phone line in-formation, and the current time and date.Clock and Date Display — displays the

5This module has been tested and found to comply with all applicable ULand FCC standards.Important Information:• To use this module, you must be in an

6FCC INFORMATIONWe have designed your module to conform to federal regulations, andyou can connect it to most telephone lines. However, each module (a

7In the unlikely event that your module causes problems on the phone line,the phone company can temporarily disconnect your service. If this hap-pens,

8Consult your local RadioShack store if the problem continues.If your module is not performing as it should, check its connection toyour phones and th

9CONTENTS Preparation....................... 11Connecting the Supplied AC Adapter...